Learn how to improve workflows with the use of Inventor Model Trees in this quick tip video.

Watch as Solutions Engineer, Tim Shaul, gives a quick overview of how to add iFeatures to the ribbon within Autodesk Inventor.

Additional tech tips are available at https://www.m2t.com/techtips/

Check out this quick tip to learn about Autodesk's health dashboard for cloud services.

Learn more at http://www.m2t.com or call (877)311-6284.

In this quick video we show you what the Inventor Pack and Go tool is for, and how to use it.

Solution Engineer, Tim Shaul, shows how to leverage the advanced Trim and Extend Options within Autodesk Inventor's sketching environment.

Contact us today to learn more about how we can improve your business processes!

Solutions Engineer, Brian Verboort, walks through content center customizations for Autodesk Inventor and how to properly manage linked libraries.

Contact us to learn more: (877)311-6284.

M2's Solution Engineer, Tim Shaul, walks through working remotely with Autodesk licensing and products. Discover the basics about VPN access, stand-alone and network licensing, and Autodesk Vault.

Join M2 Solutions Engineer, Tim Shaul, as he demonstrates the benefits of Model States in Autodesk Inventor, including:

-Machining operations from the casted model to the final part.
-Sheet metal stages for multiple bend operations.
-Weldments for weld preparation and other machining operations.
-Product families that have different values for dimensions or features that are shown or suppressed.
-Alternative assembly positions to quickly switch between them visually or used for drawing views.
-Level of completion for each stage as your design gets assembled.
-Simplification levels for removing intellectual property or high levels of detail before export iProperty information.

Pinnacle Series helps manufacturing companies use their Autodesk software more efficiently by solving challenges around continuous learning, knowledge capture and sharing, and increasing productivity.

Join us to see the benefits of the Pinnacle Series for yourself!

Speakers:
- Rose Otto, Partner Manager at Eagle Point
- Haley Lundgren, Customer Success Enablement Specialist

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

Join M2 Technologies Applications Engineer, Tristan Gunderson, as he introduces the comprehensive, cloud-based product lifecycle management platform Autodesk Upchain. Attendees will learn how to utilize the Bill of Materials features as well as create, edit and maintain files within Upchain. This webinar:

- Adding and managing documents
- Importing CAD files
- Viewing CAD files and managing details
- Using the Bill of Materials

Upchain software integrates with the CAD tools and business systems you already know and use while connecting your product development process from concept to production.

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

Autodesk Fusion 360 is constantly evolving to suit the needs of manufacturing firms. Join M2 Technologies Applications Engineer, Tristan Gunderson, to hear about the latest updates to this comprehensive software, including:

- Mesh Environment
- Electronics Design
- Reference Objects (New Feature!)
- CAM Environment Improvements

Avoid costly rework, defects, and missed deadlines that impact your bottom line with integrated CAD & CAM in Fusion 360.

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

Find out how you can more fully realize the ROI on your AutoCAD investment in this trainer-led webinar with M2 Technologies' Applications Engineer, Karol Licko.

Creativity requires time; time for collaboration and time for problem-solving. When tedious workflows are streamlined, both owners and engineers can spend resources on exceeding client expectations and innovating new business offerings. The AutoCAD Electrical Toolset is one methodology for regaining valuable project time. With thousands of schematic symbols, streamlined drafting capabilities, various standards, and Bill of Material management, this solution will reduce errors, increase accuracy and automate workflows.

Learning Objectives:
- Prepare for the move to AutoCAD Electrical.
- Deployment
- Multiuser
- Libraries
- Template Files
- Work with existing AutoCAD Designs
- Lines Wires
- Symbols

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

Register today to join M2 Technologies' Applications Engineer, Karol Licko, for this instructor-led webinar to learn how you can extend Vault’s capabilities beyond the traditional workplace.

Learning Objectives:

- How to access Vault App
- Why Vault Mobile?
- User Interface
- Vault Mobile capabilities
- Vault Mobile Licensing
- Collaborate with Cloud Drive

Autodesk® Vault data management software makes it easier to manage data in one central location, accelerate design processes, and streamline internal and external collaboration. Vault can be accessed through several methods including a mobile application and thin client for on-site or remote work. Access, view, and review CAD and non-CAD data, review and approve documents, and access insights into recent activity.

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

List to M2 Technologies' Director of Solutions Engineers, Brian Verboort, during this expert-led webinar to learn how nesting tools within Inventor can be easily and effectively leveraged for improved design and manufacturing workflows including:

- The benefits of Inventor nesting technology
- How to access nesting within Inventor
- How to run a nest study and compare different nest results
- How to generate G-Code to drive CNC cutting machines (lasers, waterjets, plasma cutters) or export nests as DXF
- How to update existing nests and tool paths to include changes

Autodesk® Inventor® software provides engineers and designers professional-grade design and engineering solutions for 3D mechanical design, simulation, visualization, and documentation. Using this comprehensive software, manufacturing specialists can perform a range of high-value workflows that result in cost and material saving as well as innovative product development.

As telework and cross-site collaboration continue to dominate the manufacturing industry, the ability to effectively simulate product development is a necessity. In this webinar, we will explore techniques for simplifying and optimizing designs for efficiency as well as methods for reducing immaterial results.

Learning Objectives:

- Techniques for simplifying and optimizing models for simulation
- Defining connections, loads, and constraints
- Refining mesh to reduce run time and gather meaningful results
- Assessing results for unreasonable errors and refining studies

Speaker: Tristan Gunderson, Applications Engineer at M2 Technologies

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

Accelerate your Printed Circuit Board (PCB) and electronic development processes across all departments and locations by automating workflows, key tasks and delivering timely information in Fusion 360. We will conduct a demo of the electrical design features within Fusion 360 during this comprehensive, instructor-led introduction.

Speaker: Karol Licko, Solutions Specialist at M2 Technologies

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

Learn how the Product Design & Manufacturing Collection provides you with the tools you need to modernize your modeling approach and gain agility throughout your development process. Use the right tool for every job with an associative connection between AutoCAD and Inventor.

Speaker: Tim Shaul, Solutions Engineer at M2 Technologies

Generative Design is changing the way manufacturing professionals create components, products, and more. In this webinar, we’ll review what this methodology entails as well as how it is becoming an integral part of manufacturing. We will also discuss:

- The economic, sustainable, and competitive advantages.
- Leveraging Generative Design tools to work more efficiently.
- Why you don’t need to make big changes to see big results.

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

Need to migrate data within Inventor or to a different platform? The Autodesk software has a few ways to manage these tasks, two of which involve the Design Assistant and Drawing Transfer Resource Wizard. The Assistant allows users to quickly rename files in preparation for migration while the Wizard is used to move or replace borders/title blocks and symbols between drawings.

In this Manufacturing Power Hour session, we'll run through these tools in detail and walk attendees through:

- Using the Design Assistant to rename files in Inventor.
- Use Copy Design to quickly generate an independent copy of the data.
- Utilize pack and go feature on top-level assembly.
- Understand the search capabilities to find specific data.
- Swap out old Title Blocks in older drawing files with newer Title Blocks are created.

Want to learn more about M2 Technologies? Contact us at (877) 311-6284.

Discover how Building Information Modeling (BIM) impacts the Manufacturing industry. This video reviews the concepts of BIM, why it’s being rapidly adopted in the AECO Industry and how adoption is creating new and expanded revenue opportunities for manufacturing companies.

This video highlights the steps a manufacturing team can take to prepare your design for the publication to BIM. These steps include steps which will support possible automated techniques as well as reference material for 4D, 5D & 6D processes.

This video discusses the typical steps for transforming data produced by common manufacturing design software to something easily consumed by the AEC industry.

This video introduces Building Information Modeling (BIM) for Building Product Manufacturers.

Create and host BIM content for your products on your own website. Customers can configure products according to specifications, directly from your manufacturing models online, and download BIM files as needed for their building projects.

For over 20 years, M2 has partnered with companies, such as GSSI, to help create road maps to achieve sustainable success. Hear more about M2's relationship with GSSI.

Contact us at (877) 311-6284 to learn more.

M2's Vice President and CEO talk about helping customers to transform how they operate by fostering collaboration and focusing on Building Information Modeling technology.

From software sales to consulting, M2 is on a mission to change the built world by helping companies produce more products, in a faster manner, without sacrificing efficiencies.

CEO, Matthew Burke, talks about the state of manufacturing and how we can work together to have a positive impact on the future of manufacturing.

For over 20 years, M2 Technologies has partnered with companies, like GSSI, to help optimize processes, increase efficiencies and achieve sustainable success, for a better future.

Original Equipment Manufacturers (OEMs) are under pressure like never before—and that pressure is being felt throughout their entire supply chain. By leveraging the cloud-based PDM platform Upchain, OEMs can see design changes immediately, get responses to quotes faster and react to updates more efficiently.

Learn more about the customization tools available within this holistic solution, including how to:

• Create and manage custom workflows
• Organize users for quicker project deployment
• Collaborate with suppliers
• Creating custom attributes and numbering systems